你好,欢迎访问济南恒思盛大仪器有限公司
大家还感兴趣的有:
你的当前位置:首页 >> 新闻资讯 >> 行业资讯

行业资讯

液压万能试验机液压元件安装该注意什么

发布时间:2018-11-23 来源:济南恒思盛大仪器有限公司 浏览:

Hydraulic universal testing machine is a large load, high availability of the universal testing machine, said the following note hydraulic components hydraulic universal testing machine installation, mainly in the following four aspects:

First, hydraulic universal testing machine, hydraulic components prior to installation, tocleaning with kerosene, two times the test pressure desirable work pressure, or the maximumpressure of one point five times. The test should be graded, not all of a sudden rise to test pressure, each level check once a.

Second, check the oil inlet and outlet seal ring is required before the installation, should highlight the installation plane sealing ring, to ensure the installation after a certain amount of compression, to prevent leakage.

Third, the directional control valve (control element to change gas or liquid flow is called thedirectional control valve) should ensure that the axis is arranged in a horizontal position.

Fourth, the fixing screw hydraulic system of hydraulic universal testing machine of thetightening force should be uniform, so that the components of the installation plane and the bottom plane good contact element.

液压万能试验机是一种载荷大、实用性高的万能试验机,下面说下液压万能试验机的液压元件安装注意事项,主要有以下四个方面:
,液压万能试验机的液压元件在安装之前,要用煤油清洗,试验压力可取工作压力的两倍,或取使用压力的一点五倍。试验时要分级进行,不要一下子就升到试验压力,每升一级检查一次。
第二,检查进出油口处的密封圈是否合乎要求,安装前密封圈应突出安装平面,保证安装后有一定的压缩量,以防泄漏。
第三,方向控制阀(用以改变管道内气体或液体流向的控制元件叫方向控制阀)应保证轴线呈水平位置安排。
第四,液压万能拉力试验机液压系统的各固定螺钉的拧紧力要均匀,使元件的安装平面与元件底板平面很好的接触。

http://www.hssdtest.com/

 

友情链接: